Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateMedeco Locksmith in Ravensworth, DC | Coral Locksmith
If you’re searching for Medeco locksmith service in Ravensworth, here’s the short answer: Coral Locksmith provides independent Medeco repair, rekeying, and installation across the 22151 ZIP code, and our work here tilts toward one recurring problem you won’t see in nearby apartment corridors: worn-out deadbolts on sagging mid-century doors. We’re not a Medeco factory shop, and we’ll tell you that plainly. What you get instead is a local team that reads pin stacks on Ravensworth’s original builder hardware every week and rebuilds cylinders rather than swapping in whatever is easiest. Call us at (855) 382-1343 for a free estimate.
Why Ravensworth Residents Choose Us for Medeco Service
Ravensworth homes were built in a narrow window, roughly the late 1940s through the 1960s, and that housing stock shapes the kind of Medeco work we do here. A Medeco cylinder installed on a 1958 brick rambler off Ravensworth Road behaves differently than the same cylinder on a 2005 townhouse. The doors are heavier. The frames have shifted through sixty winters. The strike plates are often original. Russell Tapp, our owner and lead locksmith, grew up a few miles from Wolf Trap and has spent years apprenticing on exactly these locks, learning which Medeco failure modes trace back to the cylinder and which ones trace back to the door the cylinder lives in. That distinction saves Ravensworth owners from paying for a re-pin when the real problem is a sagged door. We stock OEM Medeco pins, springs, and restricted blanks for fast turnaround, and we serve the entire Ravensworth area as an independent provider. That independence means we repair before we recommend replacement, and we never steer you toward a big-box lock that doesn’t match your key control needs. For the full range of what we handle, see our Medeco sales & service page.
Styles & brands we work with







Common Medeco Locksmith Problems We Solve in Ravensworth
These are the five we see most often in Ravensworth, tied directly to how these homes age:
- Worn pins in original builder deadbolts. Many Ravensworth homes still carry their first or first-replacement locksets. After fifty or sixty years, the pins inside a Medeco cylinder wear down, and the key starts to turn roughly or not at all. This is a re-pin job, not a door problem, and we do it with OEM pins on the spot.
- Loose strike plates on sagged doors. The wooden and steel service doors on mid-century Ravensworth homes shift over time. A Medeco bolt that once threw cleanly starts catching on the edge of the strike. The lock reads as “failing,” but the fix is relocating and shimming the strike, then adjusting the door so the bolt seats.
- Seasonal cylinder sticking from humidity and freeze-thaw cycles. Northern Virginia summers bring humidity that corrodes exterior Medeco cylinders, and winter freezes expand any moisture left inside. A cylinder that turns smoothly in June may refuse to budge by January. We clean, lubricate, and weather-seal these cylinders every spring and fall in Ravensworth.
- Restricted keyway cylinders with no key-control card. A previous owner installs a Medeco KeyMark cylinder, keeps one worn key, and loses the card. We identify the keyway before any re-pin happens, then cut and register new restricted blanks so you’re not locked into a single deteriorating key.
- Retrofit issues on doors never bored for ANSI-grade hardware. Many Ravensworth rear and service doors were original to the house and never prepared for a high-security deadbolt. Installing a Medeco Maxum often requires door prep and jamb reinforcement before the bolt throws cleanly, and we handle that work rather than leaving you with a deadbolt that half-engages.
Medeco Service in Ravensworth: What Local Conditions Mean for Your Equipment
Here’s something specific to Ravensworth that shapes our Medeco work more than almost anything else: this is a settled, owner-occupied subdivision, not a renter-churn corridor. In 22151, the recurring job is re-pinning original worn deadbolts and re-hanging sagged doors for new owners, not rekeying the same apartment lock every eighteen months. That changes how we approach a Medeco cylinder here. A new homeowner in Ravensworth usually inherits a house where the front door deadbolt was installed decades ago, maybe upgraded to Medeco at some point, and has been adjusting to the same frame for fifty years. The door has sagged. The strike has moved. The pins are worn but the cylinder body is often still sound. So the job becomes: re-pin the cylinder with OEM pins, relocate and shim the strike, adjust the door, and key everything to match. On a 1950s brick rambler off Ravensworth Road, our tech recently found a Medeco cylinder turning hard and a bolt that wouldn’t seat. The fix wasn’t a new lock. It was OEM re-pinning plus a relocated strike and a door adjustment, and the owner went from two sticky doors to one key that throws cleanly on both. That’s the Ravensworth pattern, and it’s different from what we see in nearby apartment corridors. If you’re in a neighboring community, our Ravensworth service area page covers where we work.
Medeco Models & Products We Service in Ravensworth
We service the Medeco lines that actually show up in Ravensworth homes: the Maxum deadbolt, the original and classic high-security rim and mortise cylinders, KeyMark restricted keyway cylinders, and commercial mortise cylinders. Parts matter here. We use Medeco OEM pins, springs, cylinders, and restricted blanks where they’re available, and we tell you honestly when a part is discontinued for a vintage cylinder and we’re using a quality alternative. If the cylinder body is sound, we rebuild it. If the body or tailpiece is worn out, we say so and recommend replacement rather than re-pinning a cylinder that won’t hold. We keep common Medeco parts stocked locally so most Ravensworth service calls finish the same day.
Medeco Service Pricing in Ravensworth
Medeco lock repair and rekeying in Ravensworth typically runs $75 to $220 depending on what’s actually wrong. A straightforward re-pin costs less than a full cylinder rebuild or a deadbolt retrofit on a door that needs prep. The lock type matters too: a KeyMark cylinder with restricted blanks costs more to rekey than a standard Maxum. The price we quote on the phone before anyone is dispatched is the price on the invoice. No call-out surcharge added when we arrive. Call (855) 382-1343, describe what your Medeco lock is doing, and we’ll give you a firm number before we head to Ravensworth.
Serving Ravensworth, VA — Our Local Coverage Area
We’re based in the Ravensworth area and know this community well, and we also cover Medeco in Springfield and nearby communities. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Medeco Locksmith in Ravensworth
Yes, we work on Medeco locks every week in Ravensworth, and no, we are not authorized by Medeco. We’re an independent shop that rebuilds cylinders, cuts restricted blanks where we hold the proper key control, and services Medeco hardware without steering you toward a factory dealer or a big-box replacement. Independence means we recommend what’s right for your lock, not what clears an inventory shelf. Call (855) 382-1343 to talk through what you have.
Yes, we can duplicate and originate Medeco keys for most restricted keyways, provided you have the proper key-control authorization or card. If you bought a Ravensworth home with a Medeco cylinder and no key-control documentation, we identify the keyway first, then explain exactly what’s needed to get new keys cut legally and correctly.
Most Medeco repairs in Ravensworth finish the same day we arrive, usually within an hour or two. Re-pinning a cylinder takes about half that. A full retrofit on a 1950s door that needs prep and jamb reinforcement takes longer, but we’ll tell you the expected time when you call (855) 382-1343.
We handle the Maxum deadbolt, original and classic high-security rim and mortise cylinders, KeyMark restricted keyway cylinders, and commercial mortise cylinders. If you have a Medeco model we don’t recognize, describe it over the phone and we’ll tell you honestly whether we can service it or where to send it.
In Ravensworth, expect $75 to $220 for most Medeco repair and rekeying work. The final number depends on whether we’re re-pinning worn pins, rebuilding a cylinder, or retrofitting a deadbolt into a door that was never prepped for ANSI-grade hardware. The phone quote is the price on the invoice, no arrival surcharge. Call (855) 382-1343 for an exact quote, free.
Service Areas Near Ravensworth
Beyond Ravensworth, we run Medeco service calls into the surrounding DC-area communities, including Mount Rainier, Chevy Chase, Chillum, Brentwood, Friendship Village, and Colmar Manor. The housing stock shifts a bit in each, but the high-security Medeco work stays the same. For Medeco owners a little farther out, see our Medeco service in Goddard page. If you’re on the Maryland side near Beltsville, our Medeco service in Beltsville page covers that area.
Book Your Medeco Service in Ravensworth Today
If your Medeco lock is sticking, sagging, or refusing to throw, call Coral Locksmith at (855) 382-1343. We’ll give you a firm price over the phone, and in most Ravensworth cases we can have Russell or one of our techs out the same day. We also handle North Springfield Medeco service with the same-day priority. The right lock, installed right – everything else is just noise.
Written by Russell Tapp, Owner at Coral Locksmith, serving Ravensworth and the surrounding DC communities.